Yamaha Electone EL-500 Owner's Manual page 104

3
Insert the source disk into the disk slot.
The M.D.R. starts reading the data in the source disk.
"out 1" appears on the LED display.
4
Press the eject button to take out the source disk.
"In 2" appears on the LED display to urge you to insert
the destination disk.
5
Insert the destination disk.
The number "160" appears on the LED display and
counting down is initiated as the disk is being copied.
When finished, "End" will appear on the LCD display
for few seconds.
7
RECORD
UPPER LOWER PEDAL
SONG FROM
SONG COPY
REPEAT
PAUSE STOP PLAY
MUSIC DISK RECORDER
RECORD
UPPER LOWER PEDAL
SONG FROM
REPEAT SONG COPY
PAUSE STOP PLAY
MUSIC DISK RECORDER
RECORD
UPPER LOWER PEDAL
SONG FROM
SONG COPY
REPEAT
PAUSE STOP PLAY
MUSIC DISK RECORDER
RECORD
UPPER LOWER PEDAL
SONG FROM
REPEAT SONG COPY
PAUSE STOP PLAY
MUSIC DISK RECORDER
NOTE:
"Fort" or "bAd" may appear if an error occur in the
middle of the operation. If this happen, please retry
formatting the destination disk and copying disk.
Follow the M.D.R. direction to eject/insert the disks
during the operation. Do not eject/insert the disks
frivolously ignoring the M.D.R. direction. Doing so
can damage the disk and possibly the disk drive.
104
PLAY
CONTROL UPPER LOWER PEDAL CONTROL SHIFT
TO SONG DEL.
SONG SELECT RECORD CUSTOM PLAY
– TEMPO + FORMAT
PLAY
CONTROL UPPER LOWER PEDAL CONTROL SHIFT
TO SONG DEL.
I n 2
SONG SELECT RECORD CUSTOM PLAY
– TEMPO + FORMAT
PLAY
CONTROL UPPER LOWER PEDAL CONTROL SHIFT
TO SONG DEL.
1 6 0
SONG SELECT RECORD CUSTOM PLAY
– TEMPO + FORMAT
PLAY
CONTROL UPPER LOWER PEDAL CONTROL SHIFT
TO SONG DEL.
E n d
SONG SELECT RECORD CUSTOM PLAY
– TEMPO + FORMAT