Sustain - Yamaha Electone EL-500 Owner's Manual

NOTE:
Sustain cannot be applied to the Lead
voices.
NOTE:
If Knee Lever control of the Upper or
Lower sustain has been turned on
(folded down), pressing the Upper or
Lower buttons here will not add sustain
unless the Knee Lever is pushed (See
4
page 150 for more information.).
NOTE:
Remember that the SUSTAIN buttons
are on/off switches. If you use them to
simply check the sustain length values,
you may unintentionally change the on/
off status of the effect. Remember to
check whether the sustain button lamps
are on or off before you start to play.
NOTE:
The values here must be set high enough
for the sustain effect to be noticeable.

2) Sustain

The Sustain effect, selectable for the Upper, Lower and Pedal voices, causes
voices to gradually fade out when the keys are released. The sustain on/off
and sustain length settings are independent for each keyboard, providing
maximum expressive control.
To add sustain to the voices and call up the Sustain Length page:
Press one of the SUSTAIN buttons in the SUSTAIN section.
The lamp of the button lights up to indicate that sustain is on. Press the
button again to turn sustain off.
SUSTAIN LENGTH Page
UPPER/LOWER/PEDAL
Determines the length of sustain applied to each keyboard.
The display shows the current sustain length values for each
keyboard.
Range: 0-12
52
SUSTAIN
UPPER
(KNEE)
LOWER
PEDAL
(KNEE)