Selecting From The Panel; Reverb - Yamaha Electone EL-500 Owner's Manual

3

Selecting from the Panel

Reverb, Sustain and Tremolo/Chorus pages are called up by pressing the
respective panel buttons.

1) Reverb

Reverb adds an echo-like effect to the sound, giving the impression of a
performance in a large room or concert hall. The effect can be applied
equally and simultaneously to all voices, or set individually for each voice
section of the Electone, even independently for rhythm and accompaniment.
To adjust the reverb effect and call up the Reverb pages:
Press one of the REVERB buttons, located to the left of the Upper Keyboard
Voices section.
REVERB Page 1
1
1 TYPE
Determines the type of reverb effect: Room, Hall or Church. Each
type simulates a different acoustic environment; Room is the smallest
and Church the largest.
2 LENG. (Length)
Determines the acoustic liveliness of the simulated room in the effect.
Higher settings make the room more reverberant.
Range: 0-6
3 DEPTH
Fine adjustment of the depth of reverberation or the level of the
reflected sounds. (Coarse reverb depth settings are made with the
front panel REVERB controls.) A setting of 0 cancels the reverb
effect. Range: 0-24
4 SET
Uniforms the Length and Depth settings set for all registrations to the
currently displayed values on the LCD.
REVERB
MAX
MIN
2 3 4
49
PAGE
NOTE:
When this parameter or the panel
REVERB control is set to the minimum,
the settings in the pages that follow have
no effect.
4