Yamaha Electone EL-500 Owner's Manual page 80

NOTE:
Although the number of the Registration
Memory buttons of EL-500 are limited to
eight, from Registration Memory 1
through Registration Memory 8, you can
select the other eight Registration
Memory numbers, the Registration
Memory 9 through Registration Memory
16.
This means that you can change the
Registration Shift data created with the
upper models such as EL-700 and EL-
900.
6
3 JUMP
Selects the Jump mode. In the Jump mode, each press of the Right
Footswitch selects a specified panel registration.
To set the Jump mode function:
1. Press any of the Data Control buttons below JUMP in the
Registration Shift page.
The Jump "destination" appears at the right side of the LCD.
2. Enter the desired registration number using the Data Control
buttons to select the registration number.
4 USER
Selects the User mode. In the User mode, each press of the Right
Footswitch selects registrations according to the order you specify.
To set the User mode function:
1. Press any of the Data Control buttons below USER in the
Registration Shift page.
The page information, indicating that the Edit page is available,
appears at the top right section of the LCD.
2. Press any of the Data Control buttons below SHIFT END to
determine how to terminate the registration shift function.
80