Feet; Pan; Reverb; Volume - Yamaha Electone EL-500 Owner's Manual

2 FEET

Determines the octave setting of the voice. PRESET is the original (factory)
setting; 4' is the highest and 16' is the lowest. 2' setting is added to the Pedal
Voice sections.

3 PAN

Determines the position of the voice in the stereo image. Seven pan positions
are available.
4 REV. (REVERB)
Determines the amount of reverb applied to each Voice section.
Range: 0-24
5 VOL. (VOLUME)
Fine adjustment of the voice volume. See page 27 for more information.
Voice Condition [PAGE 2]
Press the Page buttons to select PAGE 2.
1
1 EFFECT
Determines the effect type applied to each voice section. The settings and
adjustments for the effects are also made from the Effect Set pages. (For
more information, see page 45.)
1
PRESET:
-1
Selects the original (factory) effect.
1
OFF:
-2
Cancels the effect.
1
TREM. (TREMOLO):
-3
Selects Tremolo/ Chorus. See page 54 for the details of the Tremolo/
Chorus setting.
No reverb can be obtained even though
you raise the level here, unless you raise
the total reverb level using the panel
Reverb buttons (page 49).
PAGE
2
1
-1
43
NOTE: 4
1
-2
1
-3
1
-4
1
-5
1
-6
1
-7