Yamaha Electone EL-500 Owner's Manual page 144

Any existing pattern data that follows
an Ending pattern is automatically
deleted.
NOTE:
An Intro or Fill In pattern entered to the
first position is not registered as a
measure, and the current measure
display shows "-Bar" even though a
pattern has been entered.
NOTE:
The Coarse button can also be used with
the cursor controls to move the cursor
several steps at a time.
NOTE:
To create your own rhythm sequence
9
you need to assign the rhythms you use
to the rhythm buttons and dotted
buttons on the panel beforehand.
Entering Intro. And Ending Patterns:
Pressing the INTRO. ENDING button when at the first position
in the pattern row automatically enters an Intro pattern there.
Pressing the INTRO. ENDING button at any other position in
the row enters an Ending pattern.
4
Use the cursor controls to move the cursor along the pattern row in
the display and select the position at which patterns will be entered.
Then use the data controls to enter and delete pattern numbers in the
pattern row.
SEQUENCE Page
Pattern row to be
entered and edited
1 1
-1 -2
1
1 Cursor Controls
1
|<< Moves the cursor to the first position.
-1
1
< Moves the cursor one measure to the left.
-2
1
> Moves the cursor one measure to the right.
-3
2 Data Controls
2
-1 PRESET/USER
Selects the type of rhythm, Preset or User.
2
SET
-2
For initially entering a pattern number to an empty position in the
pattern row, or for replacing a pattern at the cursor position.
2
-3 INS. (Insert)
For inserting a pattern number before the current cursor position.
The new pattern is entered to the cursor position and all other
patterns to the right of the cursor are moved to accommodate the
new number. The operation is the same as for SET .
2
DEL. (Delete)
-4
For deleting a pattern number at the current cursor position.
2
CLEAR
-5
For erasing all patterns entered to the selected sequence. After
selecting CLEAR, the display for confirmation of the operation
appears.
Select [Clear] to clear the currently selected rhythm sequence, or
[Cancel] to abort the operation and return to the previous display.
144
The measure number at
the current cursor position
1 2 2 2
-3 -1 -2
2
Currently selected pattern
name (and its variation type)
2 2
-3 -4 -5