Yamaha Electone EL-500 Owner's Manual page 113

3
(If necessary) Press the Data Control buttons below [Edit Name] to
give a name to the voice you have edited.
The method to edit the name is the same as the one for the song
name in the M.D.R. section, See page 89 for more information. Up
to 16 characters can be used in this case.
4
Press any of the Data Control buttons below [Save] to save the
voice, or press any of the buttons below [Cancel] to abort the
operation.
When the voice has been saved, the message "Completed!!"
temporarily appears.
This Save page shows the same voices as the last page (USER) of
the dotted buttons' Voice Menu.
This operation automatically erases
any voice that had been previously
saved to the selected User voice
number. You should check the User
voices (page 30) before saving a voice
to make sure that you will not be
erasing any important voices.
113
8