Applying Eq - Yamaha 02R Owner's Manual

24 Introductory Recording Tutorial
SEL
Digital Recording Console 02R Getting Started Guide

Applying EQ

The next step is to apply equalization to MIC/LINE 1.
The Digital Recording Console 02R has a four-band fully parametric
equalizer, with variable bandwidth (Q), frequency (F), and gain (G). The
power of the 02R user interface means that there are two ways of adjusting
the equalization for MIC/LINE 1.
One method is to use the EQUALIZER display function.
The more convenient method is to use the buttons and controls of the
EQUALIZER block of the SELECTED CHANNEL controls.
LOW/HPF L-MID H-MID
EQ ON
Note: You can customize your 02R so that when you adjust a control of the
EQUALIZER block of the SELECTED CHANNEL controls, the EQUALIZER
display function automatically appears on the screen. See "Preferences" on page
162 of the User's Guide for more information. The default setting is to
automatically display the EQUALIZER screen.
This tutorial will describe the operation of the EQUALIZER display
function, even though it will be immediately obvious to you that using the
dedicated buttons and controls of the EQUALIZER block of the SELECTED
CHANNEL group is the more convenient method. The purpose of this
tutorial is to show you how to use the 02R.
For consistency, the tutorials will focus on the display functions, but you
should use the dedicated controls of the SELECTED CHANNEL group as
much as you can.
Turning the Equalizer ON/OFF
1. Press the [SEL] button for MIC/LINE 1.
When you press the [SEL] button for a channel, the LED and numeric
indicators of the SELECTED CHANNEL controls change to reflect the
status of the channel you pressed.
HIGH/LPF
Hz kHz
dB
EQUALIZER
Q
F
G