Yamaha 02R Owner's Manual page 79

70 Mixing and Automation
Digital Recording Console 02R Getting Started Guide
3. Use the CURSOR buttons to select the desired "Frame" rate and
press the [ENTER] button.
The 02R supports four industry standard frame rates:
• 30 – 30 frames per second.
• 30D – 29.97 frames per second (30 drop frame).
• 25 – 25 frames per second.
• 24 – 24 frames per second.
These frame rates apply to all three timecode sources: SMPTE, MTC, and
the internal clock.
4. Select the "TC Input" with the CURSOR buttons and press the
[ENTER] button.
Select the timecode source from the three options:
• SMPTE timecode (the motion picture standard).
• MTC (MIDI timecode).
• Internal.
5. Use the CURSOR buttons to select the "Automix" ENABLE and
press the [ENTER] button to switch it on.
The automation system will not function unless this check box is enabled.
6. Select the desired "Overwrite" items with the CURSOR buttons
and press the [ENTER] button.
This field allows you to select the types of events that will be recorded.
Only the items selected will be recorded. Choose from the following:
• FADER – channel level operations (fader or encoder) including
auxiliary send levels.
• CH ON – [ON] button selections for each channel.
• PAN – pan position for each channel.
• EQ – equalizer selections for each channel.
Note: Scene memories and all library recall operations will be recorded
regardless of the settings of the "Overwrite" options.
The other options on this screen are also important, but not for the
purposes of this tutorial. See "Main Screen" on page 129 of the User's Guide
for more details.