Setting The Auxiliary Send Level - Yamaha 02R Owner's Manual

Setting the Auxiliary Send Level

The following example shows setting the send level for MIC/LINE 1 to the
first auxiliary channel, AUX1.
1. Press the [AUX 1] button.
The AUX1 display function appears:
AUX 1
The faders change from channel level controls to auxiliary send level
FADER STATUS
INPUT
controls. To indicate the change , the AUX LED of the FADER STATUS
AUX
indicator will illuminate. The number indicator corresponding to the
1 2 3 4
current AUX button (in this case, AUX1) is also illuminated. The faders will
5 6 7 8
automatically relocate from their channel level positions to the auxiliary
send level positions.
Note: Avoid blocking the fader movements when the faders relocate to their
auxiliary send positions by placing objects on the 02R. It is possible to damage the
faders.
Although the faders have moved to the auxiliary send level positions, the
02R remembers the channel signal levels. You will still be able to hear the
signal.
2. Select MIC/LINE 1 using the [SEL] buttons or the CURSOR buttons.
Turn the auxiliary send on by pressing the [AUX 1] button and then the
[ON] button in the AUX group of the SELECTED CHANNEL controls. The
default is for the send to be ON, therefore this step is not usually required.
Note: In order to change the auxiliary send status from on to off, you must first
select the send channel with the corresponding button of the SELECTED
CHANNEL – AUX controls
3. To change the auxiliary send from post to pre fader, press the
Secondary Recording Tutorial
[ENTER] button.
Digital Recording Console 02R Getting Started Guide
43