Yamaha 02R Owner's Manual page 46

Introductory Recording Tutorial 37
Selecting the Routing
1. Press the [ROUTING] button.
The ROUTING display function appears showing the selected routes for
ROUTING
MIC/LINE 1.
2. Use the ROUTING buttons of the SELECTED CHANNEL controls to
select the routes for MIC/LINE 1.
As you press the ROUTING buttons, the LED inset in the button
illuminates and the corresponding icon on the ROUTING display function
screen changes to reverse video.
You can also select the routes by using the CURSOR buttons to move to the
desired route icon and pressing the [ENTER] button.
Note: When you select a route, the signal from the channel will be routed to the
selected bus. The output from that bus will appear at the corresponding outputs of
all the I/O cards installed in the 02R. The only exception is when you are using I/O
cards in slots 1 and 2 for direct output. See "Routing" on page 39 of the User's
Guide for further details.
Digital Recording Console 02R Getting Started Guide