Yamaha 02R Owner's Manual page 287

Peak Meter Bridge and Wooden Side Panels
1. Turn OFF the power to the 02R by pressing the POWER switch on
the back panel.
TO PREVENT ELECTRICAL SHOCK, ENSURE THE 02R IS POWERED OFF
BEFORE YOU FASTEN ANY CONNECTORS OR UNDO ANY SCREWS!
Note: Before you install the MB02 on the 02R, be certain to turn the power
off. Not only do you risk electrical shock, you can also damage either the 02R
or the MB02. You may also invalidate any warranties for the Digital
Recording Console 02R or the Peak Meter Bridge (MB02).
2. Install the Peak Meter Bridge and/or Wooden Side Panels as
shown in the following diagram:
3. Turn ON the power to the 02R.
Verify that the MB02 is functioning correctly.
Memory Expansion Kit
The Memory Expansion Kit (ME4M) is a dealer/service center
installed option only. Any attempt by a customer to install this
option will invalidate any warranties for the Digital Recording
Console 02R or the ME4M.
Please take your 02R to your YAMAHA dealer or a YAMAHA service
centre to have the Memory Expansion Kit (ME4M) installed in the unit.
Installing Options
Digital Recording Console 02R User's Guide
177