Event Edit (Ch On) - Yamaha 02R Owner's Manual

1. Press the [AUTOMIX]
button.
AUTOMIX
An AUTOMIX display
function appears.
Press the [AUTOMIX ]
button repeatedly to get
to the "Event Edit
(CH ON)" screen.
2. Use the CURSOR buttons
to select an event to
edit.
3. Use the CURSOR buttons
to select the INSERT icon
and press [ENTER] to
insert an event.
4. Use the CURSOR buttons
to select the DELETE icon
and press [ENTER] to
delete the current event.

Event Edit (CH ON)

The fifth AUTOMIX display function is the Event Edit (CH ON) screen
shown below:
The display consists of a table listing Time Code, Channel, and ON/OFF
(event).
There are two control icons to the right of the table; INSERT and DELETE.
When you insert an event, it is always given the same timecode value as
the previous event. Use the CURSOR buttons to select the timecode field
and adjust the timecode value to suit. Change the channel or the
ON/OFF values if required.
When you change the timecode value for an event, the events are
automatically sorted in timecode location.
Automation
Digital Recording Console 02R User's Guide
139