Yamaha 02R Owner's Manual page 274

164 Digital I/O, Setup, and Utilities
Digital Recording Console 02R User's Guide
• DIO Warning OFF – With this option selected, the 02R will not report a
warning when an error is detected in the digital signals being input
from one of the digital I/O cards. When the 02R detects an error, the
message "DIGITAL I/O Error!" is flashed on the display.
If you have a poor connection to your modular digital multitrack
recorder or any other digital audio devices, this message may appear
on the screen so often that it becomes distracting. You should be aware
that if the 02R detects an error in the digital input or output, your
recorded data may be compromised. However, some modular digital
multitrack recorders will cause this error while performing
synchronization during start-up.
• MIDI Warning OFF – With this option selected, the 02R will not report
a warning when it receives a MIDI error.
The following error conditions will not be reported: "Byte Count
Error!", "Check Sum Error!", "Code Mismatch!", "ID Mismatch", and
"MIDI Ch Mismatch".
Preferences – Factory Settings
Option / Setting
Auto EQ Display
Auto PAN Display
Auto ROUTING Display
Auto AUTOMIX Display
Auto SOLO Display
Store Confirmation
Recall Confirmation
Mix Update Confirmation
REC Recall Safe Fader
Fader Flip Recall Safe
Remote Talk Back (C3)
Option / Setting
ON Transmit Key Remote
ON Fast Meter Fall Time
ON Pre Fader Direct Out
OFF Slate Tone
OFF TC Drop Warning OFF
ON DIO Warning OFF
OFF MIDI Warning OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF