Using The Lower Thread Counter - Brother S-7300A Instruction Manual

5. USING THE OPERATION PANEL (BASIC OPERATIONS)

5-7. Using the lower thread counter

・ The lower thread counter can be used to let you know approximately how much lower thread is remaining.
* The lower thread counter should be used as a guide only.
・ The value displayed by the lower thread counter display is reduced by 0.1 from the initial setting value each time the
number of stitches x sewing pitch reaches 0.1 m, and a warning is given when the counter goes below 0.
Switching to lower thread counter setting mode
1
2
37
For the detailed home screen
Set the counter display so that it is displaying the lower thread counter icon,
and then keep pressing the lower thread counter key to switch to lower thread
counter setting mode.
For the simple home screen
Keep pressing the lower thread counter key to switch to lower thread counter
setting mode.
For the menu screen
Select "Bobbin thread counter setting" to switch to lower thread counter setting
mode.
・ You can use the ON/OFF key to turn the counter function on and off.
* When the function is turned off, "---" will appear in the counter display (1)
and the counter will not operate while sewing is carried out.
・ Use the + and - keys to set the value for the lower thread counter.
When the value is changed, the lower thread counter (1) will flash.
The setting range is from 0.1 to 99.9 m.
・ You can press the Reset key to provisionally reset the value to the one
which was set previously (only if the counter function was turned on).
・ If you press the OK key, the value will be confirmed and the display will
(1)
return to the home screen.
S-7300A