Table of Contents
Advertisement
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
5-5-4. Correction sewing
Correction sewing operation can be set.
5-5-5. AUTO
Automatic sewing and thread trimming operations can be set.
However, they can only be set in conjunction with continuous backtack sewing and fixed stitch sewing.
33
Setting details
Correction sewing operation using the hand switch is disabled.
NOTE:
Operating the hand switch may result in an operation other than
correction sewing being carried out.
* The operation mode can be changed to a different mode from
correction sewing. (Refer to "6-10. Hand switches".)
Correction sewing operation using the hand switch is enabled.
If the sewing machine is stopped, sewing will be carried out at
slow speed while the hand switch is being pressed.
* The operation mode can be changed to correction sewing.
(Refer to "6-10. Hand switches".)
Setting details
Automatic sewing is not carried out, and sewing stops when the
treadle is returned to the neutral position.
Sewing is carried out automatically for the number of stitches
which have been set (start and end backtacking and fixed stitch
sewing) simply by depressing the treadle once.
After sewing is complete, depress the treadle backward to carry
out thread trimming.
Sewing is carried out automatically for the number of stitches
which have been set (start and end backtacking, fixed stitch
sewing, thread trimming) simply by depressing the treadle once.
After sewing is complete, thread trimming is carried out
automatically.
S-7300A
Advertisement
Table of Contents
