Needle Up/Down; Thread Trimming Lock; Thread Wiper - Brother S-7300A Instruction Manual

5-5-1. Needle up/down

This sets whether the needle bar stops in the up position or the down position when the treadle is returned to the neutral
position and sewing stops.

5-5-2. Thread trimming lock

This sets the thread trimming operation when the treadle is depressed backward.

5-5-3. Thread wiper

Thread wiping operation can be set.
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Setting details
Needle stops in the down position.
However, the needle will stop in the up position when the treadle is
depressed backward, and after thread trimming (needle raised)
during automatic sewing.
Needle stops in the up position.
Setting details
Thread trimming operation is carried out when the treadle is
depressed backward.
Thread trimming operation by depressing the treadle backward is
locked (disabled).
Setting details
Thread wiping operation is disabled after thread trimming.
Thread wiping operation is enabled after thread trimming.
* If thread trimming operation is disabled, thread wiping operation
will also be disabled.
S-7300A
32