Needle Down Position Adjustment - Brother XL-6060 Series Service Manual

4.

NEEDLE DOWN POSITION ADJUSTMENT

STANDARD
The needle descent for zigzag sewing should be such that the needle descends evenly to the center of the
needle hole in the needle plate.
ADJUSTMENT
1. Turn the selection dial and set the pattern display to zigzag maximum sewing.
2. Loosen the screw securing the eccentric nut (B), turn the balance wheel, lower the needle left and right, turn
the eccentric nut (B) with a spanner, and tighten the eccentric nut (B) screw so that the left and right needle
descent are symmetric about the center of the steel plate hole.
XL-6040 XL-6060
XL-6050
Should be even left
and right
www.promelectroavtomat.ru
Eccentric nut
-32-
Adjustment
range