Needle down centering
Standard
• When the needle position dial is set to "M" and the zigzag dial is set to "0", the needle should be in the
center of the needle plate hole.
Adjustment
• Set the needle position selector to M
and the stitch width knob to 0
.
• Loosen the setscrew
of the zigzag connecting rod
.
• Loosen the fixation screw of the eccentric nut
.
• Turn the eccentric nut
to make adjustment.
• Retighten the fixation screw of the eccentric nut
.
• Retighten the setscrew
.
- 5 -