Table of Contents
Advertisement
LED Status
PAPER LED is flashing and
Soft Power LED is flashing
PAPER LED and CANCEL LED
alternately flash.
CANCEL LED is on steady
Continued on next page.
36
© 2009 Neopost USA Inc. All rights reserved.
Possible Cause
Print carriage movement is
obstructed
The print carriage is stuck in the
maintenance station
Printer is performing cartridge
maintenance.
Print cartridge might be low on
ink.
TROUBLE SHOOTING
Possible Solution
1.
Turn the printer off using the Main Power
switch.
2.
Open the top cover on the printer.
3.
Remove obstruction.
4.
Close the top cover on the printer.
5.
Turn the printer on using the Main Power
switch.
6.
Resend the print job.
1.
Open the top cover on the printer.
2.
Remove the ink cartridges, then close the
cartridge flaps after removing the ink
cartridges.
3.
Close the top cover on the printer.
4.
Turn the printer off, then on again, using the
Soft Power button.
5.
Open the top cover on the printer.
6.
Reinstall the ink cartridges.
7.
Close the top cover.
8.
Wait for printer to finish.
1.
If one of the cartridges is low on ink, replace
it.
2.
If neither cartridge is low, press the PAPER
button.
3.
If the LED remains on, turn the printer off
and on using the Soft Power button.
SECTION 5
Advertisement
Table of Contents
