Neopost HJ510C Operating Manual page 27

SECTION 3
OPERATING THE AS-510C
The Type is box allows you to select the type of
paper you are going to print. Some settings such
as Photo Paper, Glossy will adjust the printing
mode in the software to account for the quality of
the paper.
The Print Quality box allows you to select the
amount of ink and the resolution of the image the
printer will print. Fast Draft uses the least amount
of ink, has the lowest resolution and prints the
fastest. It is equivalent to 300 dpi (dots per inch).
Fast Normal and Normal are approximately 600
dpi and print slower, but at a higher quality. The
Best setting is approximately 1200 dpi and is used
where high quality images are required. Finally,
there is the Maximum DPI setting. This setting is
used when printing photos and has a correction
routine available under the Real Life Digital
Photography button to help improve the quality
of photos you print.
At the top of every page in the Properties
window, you will notice a selection for Print
Task Quick Sets. This feature allows you to
select, edit, add, and save tasks that you plan to
reuse.
The Quick Set menu list contains some standard
tasks to select from.
To save a new task; type a new Quick Set name
into the box, then press the Save button.
To modify an existing task; make the desired
changes to the properties, then click on the Save
button. A modified task can also be saved as a
new task by typing a new Quick Set name into the
box before pressing the Save button.
To remove an unwanted task from the menu list;
select the title you want to remove and then click
on the Delete button.
23
© 2009 Neopost USA Inc. All rights reserved.