Avaya E129 User Manual page 49

Disable Call-Waiting
Disable Call-Waiting Tone
Disable Direct IP Calls
Use Quick IP-Call mode
Disable Conference
Disable Transfer
Auto-Attended Transfer
In-call dial number on pressing
transfer key
Configuration via Keypad Menu
Enable STAR key Keypad
locking
Password to lock/unlock
Offhook timeout
FIRMWARE VERSION 1.0.5.2
60
Up to three cadences are supported.
Disables the call waiting feature. The default setting is "No".
Disables the call waiting tone when call waiting is on. The default setting
is "No".
Disables Direct IP Call. The default setting is "No".
When set to "Yes", users can dial an IP address under the same
LAN/VPN segment by entering the last octet in the IP address. To dial
quick IP call, off hook the phone and dial #XXX (X is 0-9 and XXX
<=255), phone will make direct IP call to aaa.bbb.ccc.XXX where
aaa.bbb.ccc comes from the local IP address REGARDLESS of subnet
mask. #XX or #X are also valid so leading 0 is not required (but OK). No
SIP server is required to make quick IP call. The default setting is "No".
Disables the Conference function. The default setting is "No".
Disables the Transfer function. The default setting is "No".
If set to "Yes", the phone will use attended transfer by default. The
default setting is "No".
Configures the number for the phone to dial as DTMF during the call
using TRANSFER button.
Configures the access control for the users to configure from keypad
Menu. There are three different options:

Unrestricted. All the options can be accessed in keypad Menu.

Basic settings only. The CONFIG option will not display for users
to access in keypad Menu.

Constraint Mode.
NETWORK options will not display for users to access in keypad
menu.
If set to "Yes", the keypad can be locked by pressing and holding the
STAR * key for about 4 seconds. A lock icon will show indicating the
keypad is locked. The default setting is "Yes".
Note:
When the keypad is locked, users would need press and hold the STAR
* key for about 4 seconds again and then enter the password to unlock
it.
Configures the password to lock/unlock the keypad. The password field
allows number with up to 32 characters.
If configured, when the phone is on hook, it will go off hook after the
E129 SIP DESKPHONE USER MANUAL
CONFIG, FACTORY FUNCTIONS and
Page 50 of