Advertisement
Setting the On and Off Times
To alter these settings please proceed as follows:-
Press the
set button
Use
until set
+ and -
indicator is
buttons
next to HW
to adjust
or CH
day
PROG
Position
Repeat this
process for
2nd and 3rd
settings
Use the + and - buttons to select
day required and press COPY 'IN'
1
is displayed to confirm the COPY
Repeat for other days as required
Press ENTER. Use the + and -
buttons to select the day required
and press ENTER. Set 1st, 2nd and
2
3rd times as before. To repeat for
other days go to 2, to COPY go to 1
Default Time settings
st
st
1 ON
1 OFF
6.30AM
8.30AM
The default time settings shown above are preset at the factory
NB. The factory default settings for the 2nd ON/OFF times are both set at 12:00pm
(midday) which cancels this 'ON' period giving 2 ON/OFF periods for the day. If a midday
'ON' period is required set the 2nd ON and OFF times accordingly. If not press ENTER
twice.
Use
+ and -
Press
buttons
ENTER
to adjust
1st ON
time
Enter the
3rd OFF time
and the word
COPY is
displayed
To set independent
times for other
days go to 2
nd
nd
2 ON
2 OFF
12.00PM
12.00PM
Press
ENTER
To follow the copy
route and repeat all
programmed times
for another day go
to 1
To transfer to independent times for other
days go to 2 or to finish programming
press the SET button until the SET
indicator is in the RUN position
To finish programming press the
SET button until the SET
indicator is in the RUN position
rd
3 ON
4.30PM
Use
+ and -
Press
buttons
ENTER
to adjust
1st OFF
time
rd
3 OFF
10.30PM
9
Advertisement
