Secure SCP318 User Operating Instructions Manual page 8

Setting Time of Day and Date
The SCP318 timeswitch has a built in clock and calendar. This
will mean that you will need to enter the date as well as the time
on initial set up or if the factory re-set has been used.
Having done this, the clock will automatically adjust for BST/GMT
time changes throughout the year.
Press the
set button
until the set
indicator is
next to the
'clock'
position
Once the year is set and the ENTER
button is pressed the process is
complete and the display will return
to the run position
Use the Use the
+ and - + and -
buttons to buttons to
adjust the adjust the
hour and minutes
press and press
ENTER ENTER
Use the
+ and -
buttons to
set the
date and
press
ENTER
Check that the correct time and day are
showing in the display. If the wrong day is
showing in the display that would indicate
that the date has not been set correctly
and the above process should be repeated
Use the Use the
+ and - + and -
buttons to buttons to
set the set the
month and year and
press press
ENTER ENTER
8