Resetting The Timeswitch - Secure SCP318 User Operating Instructions Manual

Electronic equipment can in some circumstances be affected by
electrical interference. If the programmer's display becomes
frozen or scrambled; or if you wish to revert back to the default
time settings please reset by pressing the SET and SELECT
buttons together as shown below.
After initial installation it is advisable, before programming the
timeswitch for the first time, to reset the unit. Resetting can only
be achieved with the power 'ON' by pressing the SET and
SELECT buttons together. This will return the programmer to the
factory set default times.
Press the SET and SELECT buttons
together then release the buttons
and the programmer will return to
preset factory settings

Resetting the timeswitch

SET
SELECT
7