Technical Specifications Figures Figure 1: PT-571HDCP DVI Line Transmitter Figure 2: PT-572HDCP DVI Line Receiver Figure 3: Connecting the PT-571HDCP / PT-572HDCP DVI Line Transmitter/Receiver 8 Figure 4: CAT 5 PINOUT Tables Table 1: PT-571HDCP DVI Line Transmitter Features Table 2: PT-572HDCP DVI Line Receiver Features...
2 Ultra-Compact PicoTOOLS™ - 4 units can be rack mounted side-by-side in a 1U rack space with the optional RK-4PT rack adapter 3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com...
Using Twisted Pair Cable, see section • The HDCP standard, see section • Recommendations for achieving the best performance, see section 1 For details of the PT-571HDCP DVI Line Transmitter and PT-572HDCP DVI Line Receiver, see sections and 4.2, respectively KRAMER: SIMPLE CREATIVE TECHNOLOGY...
CAT 5 cable, for longer distances, heavy gauge cable should be used 1 Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non- Kramer CAT 5, CAT 6 and CAT 7a cables may not reach these ranges 2 Extended Display Information Data...
Overview Using Twisted Pair Cable Kramer engineers have developed special twisted pair cables to best match our digital twisted pair products; the Kramer: BC-DGKat524 (CAT 5 24 AWG), the Kramer: BC-DGKat623 (CAT 6 23 AWG cable), and the Kramer: BC-DGKat7a23 (CAT 7a 23 AWG cable). These specially built cables significantly outperform regular CAT 5 / CAT 6 / CAT 7a cables.
PT-572HDCP DVI Line Receiver, see section Your PT-571HDCP DVI Line Transmitter The PT-571HDCP DVI Line Transmitter receives a DVI signal, encodes it, and transmits it over a CAT 5 cable to the PT-572HDCP. The PT-571HDCP has: • A DVI input connector •...
Your PT-571HDCP / PT-572HDCP 4.2 Your PT-572HDCP DVI Line Receiver The PT-572HDCP DVI Line Receiver receives an encoded signal over a CAT 5 cable transmitted from the PT-571HDCP, decodes it, and converts it to a DVI output. The PT-572HDCP has: •...
Figure 3, do the following: 1. Connect the CAT 5 OUT RJ-45 connector on the PT-571HDCP to the CAT 5 IN RJ-45 connector on the PT-572HDCP via a CAT 5 cable (see section 5.1). 2. On the PT-571HDCP, connect a DVI source (for example, a computer graphics source) to the DVI IN connector.
BC-DGKat524 (CAT 5 24 AWG), BC-DGKat623 (CAT 6 23 AWG) and BC-DGKat7a23 (CAT 7a 23 AWG) cables 1 Specifications are subject to change without notice 2 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com KRAMER: SIMPLE CREATIVE TECHNOLOGY...
Page 11
EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: 1. Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
Page 12
For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the PT-571HDCP and is the answer not in the manual?
Questions and answers