Parts Identification; Ordering Detector Batteries - Johnson Controls PowerG PG9200AX User Manual

Parts identification

Accessories

Ordering detector batteries

Specified batteries: Four LSH20 batteries manufactured by SAFT, two for the transmitter and two for the
transceiver. For information about batteries, visit the following website and contact your local SAFT sales
representative. See http://www.saftbatteries.com/battery-search/ls-lsh/.
Enrolment
The device is compatible with the following panels:
•
PowerSeries NEO (v1.37 and higher)
•
PowerSeries Pro (v1.31 and higher)
•
IQ2 (v2.6 and higher)
•
IQ3 (v3.0 and higher)
•
IQ4 (v4.0 and higher)
•
PowerSeries NEO2 / Lucy Hybrid v1.0
The device transmitter and receiver are enrolled separately onto the control panel. The modules can be enrolled onto
panel in any order. The device sends the PowerG enroll request on power up of the device.
Enrolling the device
The device begins the enrolment process when the OPTEX RF module is powered on. The OPTEX RF module is a
card in the detector.