Date/Time Setting - TEC EO1-32004 Owner's Manual

9. PROGRAMMING PROCEDURES
9.12

DATE/TIME SETTING

Menu Page: 2
Item No.: 1
Date, time, machine number, and store code are set with this procedure.
<MENU>
Page 2
Set the machine No.
(max. 6 dig.)
NOTES:
1. Express the time in a 24-hour military format.
2. The H-9000 will check details of date (time) input, and any wrong date (time) will result in
an error mode. Then the correct date (time) should be re-entered and press the
key.
3. Even when initial Set 8-4, 8-5 or 8-6 is set to the "Julian Date" side, the way to enter the
date in the date setting operation is the same as in the ordinary case.
4. The date display method can be changed by the initial setting.
9.13 CMT/PL-3
Menu Page: 2
Item No.: 2
■
CMT Operations
The H-9000 is designed to interface with a Cassette Magnetic Tape loader. This loader allows the transfer
of the entire PLU file, ingredient file and other data from the H-9000 to tapes. This can be accomplished in
number of operation steps.
In turn, information from the tape can also be transferred to another H-9000 printer.
<MENU>
Page 2
NOTES:
1. The error mode can be released by pressing the
through the above steps.
2. Use the metal cassette tape which is commercially available and has a capacity of 45 or
60 minutes recording.
3. For operations of the CMT loader, refer to the instruction manual provided with the CMT
loader.
k
Set the date.
1
(Month, Day, Year)
ENTER
Set the transmission items.
2
(Refer to table 4)
NEXT
PLU
ENTER
Set the store No.
(max. 5 dig.)
or
CLEAR
9- 20
9.12 DATE/TIME SETTING
Set the time.
(Hour, Minute)
k
ENTER
PROG.
ESC.
<MENU>
PROG.
ENTER
Page 2
Main
ESC.
<MENU>
key, and operated again
ENTER
<MENU>
Page 2
Main
<MENU>
CLEAR