Kenwood NX-5200K3 User Manual page 74

Formatting the microSD card
o
1
Press the key programmed as [Format SD Card] to enter Format SD Card mode.
"You will lose all data on the card." appears on the display. Press the [ ] key.
●
2
Select "Start" and press the [ ] key to format the card.
When formatting is complete, the
●
the display. Folders for storing the recorded files are created on the microSD card.
Auto Recording
Auto Recording records and retains your last conversation, allowing you to catch
what you may have missed hearing during the conversation.
If activated, the auto recording function will continuously record all transmitted and
received signals to the built-in memory or microSD card according to the maximum
recording length set.
The indicator blinks while recording is in progress.
●
When recording is made to the built-in memory, the backup timing of the voice
recording varies according to the First-in First-out Deletion setting. If First-in First-out
Deletion is enabled, the recording is backed up when the transceiver is turned off
using the Power switch. If disabled, the recording is backed up each time a recording
is made. For details on the First-in First-out Deletion function, consult your dealer.
Note:
Recording stops when the maximum recording length is reached.
●
If the First-in First-out Deletion function is disabled, new recordings cannot be made when
●
the memory in the built-in memory or microSD card is full. "Memory Full" appears on the
display for 1 second.
If the First-in First-out Deletion function is enabled and recording is made to the built-in
●
memory, the transceiver turns off without backing up the recording when it is turned off in
the following situations:
When the battery runs out
–
When the battery pack is removed
–
You can play back the voice recording in Playback mode, or delete the recording if
●
necessary.
If Auto Recording is used concurrently with the GPS Data Storage function, the beginning
●
of the audio recorded by Auto Recording may be clipped off.
Voice Memo
Voice Memo allows you to record audio near the transceiver manually. Maximum
recordable time per Voice Memo is 10 minutes. The voice files are stored on the
microSD card.
If a speaker microphone such as KMC-54WD is connected to the transceiver, the
audio input to the microphone of the speaker microphone is recorded. Otherwise, the
audio input to the microphone of the transceiver is recorded.
1
Press the key programmed as [Voice Memo] to enter Voice Memo mode.
Alternatively, press the key programmed as [Menu] to enter Voice Memo mode using the
Menu Mode.
Recording starts on the transceiver.
●
The transceiver will exit Voice Memo mode and stop the recording automatically after
●
10 minutes into the recording.
2
To stop the recording manually, press the [ ] or [ ] key.
74
indicator lights up and "Complete" appears on