Kenwood NX-5200K3 User Manual page 29

GPS/ Bluetooth Reset
o
Activates GPS/ Bluetooth Reset mode.
GPS Position Display <GPS_P>
o
Allows you to display your location data. Location data that is saved on the microSD
card using the Save GPS Data function or in GPS Position Display mode can be
displayed.
Group <Group>
o
Activates Group Call Mode.
Group + Short Message <Grp+SD>
o
Allows you to specify a Group ID to send short messages.
Group + Status <Grp+ST>
o
Allows you to specify a Group ID to send status messages.
Group ID/ Channel Entry <GrpEnt>
o
In NXDN Trunking systems, press this key to enter a Group ID. In other operating
systems, this key functions the same as Channel Entry.
High Transmit Power <High>
o
Turns High Transmit Power on or off. When using a channel programmed with low
or medium power, this allows you to change the output power to high.
Home Channel <Home>
o
Press this key to jump to your home zone and channel (pre-programmed by your
dealer). If activated by your dealer, you can set your own Home Channel by selecting
your desired zone and channel using Home Channel Select.
Home Channel Select
o
Allows you to set the currently selected channel to Home Channel.
Individual <Indcal>
o
Refer to "Making Individual Calls" {p. 6} {p. 8} .
Individual + Short Message <Ind+SD>
o
Allows you to specify a Unit ID to send short messages.
Individual + Status <Ind+ST>
o
Allows you to specify a Unit ID to send status messages.
IP Address
o
Displays the IP address.
Key Delete <KeyDel>
o
Allows you to delete the Encryption key. Refer to "DELETING THE ENCRYPTION
KEY (AES (SCM*)/ DES (Built-in-DES or SCM*) and Enhanced Encryption
only)" {p. 45} .
29