Kenwood NX-5200K3 User Manual page 35

Talkgroup Reset <TG_Rst>
o
Allows you to reset the Talkgroup ID of a channel.
Task Request Confirmation <Task>
o
Allows you to check a received Task Request message (up to 290 characters) and
respond to the message in the Task Request function.
The Task Request function manages tasks by using the Short Message function. The
task administrator sends the operator a Task Request message of which the operator
will check the instructions in the message and return a response message such as
task started, task ended or rejected to the task administrator. This allows the task
administrator to keep track of the progress of the operator. For details, consult your
dealer.
Telephone Disconnect <Disc>
o
Allows you to disconnect the public telephone line connected through a repeater in
LTR Trunking system.
Transceiver Password <Passwd>
o
Allows you to set a password to lock the transceiver.
TX Audio Equalizer (High)
o
Allows you to set the audio response for high frequencies.
TX Audio Equalizer (High Midrange)
o
Allows you to set the audio response for high midrange frequencies.
TX Audio Equalizer (Midrange)
o
Allows you to set the audio response for midrange frequencies.
TX Audio Equalizer (Low Midrange)
o
Allows you to set the audio response for low midrange frequencies.
TX Audio Equalizer (Low)
o
Allows you to set the audio response for low frequencies.
TX Auto Gain Control
o
Allows you to set the transceiver to automatically adjust the microphone sensitivity
for easy listening.
Vibrator <Vib>
o
Allows you to toggle the vibrator function ON and OFF. When the vibrator is on, the
transceiver will vibrate when a call is received.
Voice Memo <Memo>
o
Allows you to record audio near the transceiver manually.
VOX <VOX>
o
Allows you to adjust the VOX Gain level.
35