Kenwood NX-5200K3 User Manual page 28

CW Message <CW_Msg>
o
Press this key to send the CW message.
Direct Channel 1 ~ 5 <DR1 ~ DR5>
o
Press one of these keys to jump to a frequently used zone and channel (pre-
programmed by your dealer). If activated by your dealer, you can set your own Direct
Channels by selecting your desired zone and channel using Direct Channel 1 ~ 5
Select.
Direct Channel 1 ~ 5 Select
o
Allows you to set the currently selected zone and channel as the Direct Channel 1 ~
5.
Display Format <Disp>
o
Allows you to switch the display between the zone-channel number and the channel
name.
Eject SD Card <Eject>
o
Allows you to eject the microSD card.
Emergency
o
Refer to "EMERGENCY CALLS" {p. 43} .
External Mic Sense
o
Activates External Mic Sense mode.
External Speaker <Spkr>
o
Switches the speaker from the transceiver's built-in speaker to an optional external
speaker.
Fixed Volume <FixVol>
o
Allows you to change the volume level of the tone.
Format SD Card <Format>
o
Allows you to format the microSD card.
Front Panel Programming <FPP>
o
Activates Front Panel Programming mode. This mode allows you to change the
frequency and other data of a Conventional channel and to add new Conventional
channels using your transceiver even when the FPU (Field Programming Unit)
software or a computer is not available.
Function <Func>
o
Press this key, then press a programmable key to activate its secondary function.
GPS <GPS>
o
Enables or disables the GPS function.
28