Kenwood NX-5200K3 User Manual page 59

SITE TRUNKING (P25 Trunking)/ NETWORK FAILURE (NXDN
Trunking)
On Trunking channels, if set up by your dealer, the transceiver will indicate a network
condition on the registered site. "Site Trunk" (P25)/ "Network Fail" (NXDN) appears
on the display when the transceiver receives a network disabled message.
CONTROL CHANNEL HUNT
On P25 Trunking and NXDN Trunking channels, the transceiver must search for a
control channel. While searching for a control channel, no signals can be received.
The search begins automatically when you change to a Trunking channel.
While hunting for a channel, the antenna indicator will flash. When a control channel has
●
been found, the antenna indicator remains on the display without flashing.
VOICE ANNOUNCEMENT
An audio voice will be announced as below by dealer setting.
When changing the zone and/or channel, the new zone and channel number are
●
announced.
When changing the status, the new status is announced.
●
When changing the function setting, the new setting is announced.
●
VIBRATOR
When an optional external vibrator (KCT-48VU External Vibration Unit) is installed,
the vibrator function will alert you when an optional signaling call is received. Press
the key programmed as [Vibrator] or access the Menu {p. 14} to turn the Vibrator
function on and off.
59