Kenwood NX-5200K3 User Manual page 31

Monitor <Moni>
o
Allows you to turn the transceiver signaling off, to listen to all calls that are received
on the channel.
Monitor Momentary <Moni>
o
Press and hold this key to momentarily turn the transceiver signaling off. Releasing
this key turns the transceiver signaling back on. While signaling is off, you can listen
to all calls that are received on the channel.
Operator Selectable Tone <OST>
o
Refer to "Operator Selectable Tone (OST)" {p. 46} .
OST Down <OST->
o
Press this key to decrease the Operator Selectable Tone number of your selected
channel.
OST List
o
Allows you to enter OST List mode.
OST Up <OST+>
o
Press this key to increase the Operator Selectable Tone number of your selected
channel.
OVCM <OVCM> (Open Voice Channel Mode)
o
Allows the conversation of a received call to be heard even when the received ID
does not match.
Playback <Play>
o
Refer to "Playback" {p. 76} .
Playback (Last Recording) <Play_L>
o
Refer to "Playback" {p. 76} .
Priority-channel Select <OSP>
o
Allows you to set a channel as a priority channel.
Radio Check
o
Allows you to check whether the transceiver can be communicated or not.
Radio Inhibit
o
Allows you to inhibit the transceiver operation by remote control.
Radio Uninhibit
o
Allows you to uninhibit the transceiver operation by remote control.
31