Kenwood NX-5200K3 User Manual page 10

Making Individual Calls (NXDN Conventional/ DMR Conventional)
o
You can make calls to specific persons.
1
Press the key programmed as [Individual], [Individual + Short Message] or
[Individual + Status] to enter Individual Call Mode.
Alternatively, press the key programmed as [Menu] to enter Individual Call Mode using
the Menu Mode.
The ID list appears on the display.
●
2
Press the [J] and [K] keys to select a unit ID from the list that has been pre-
entered into your transceiver.
Alternatively, on full key models, you can enter a unit ID directly by pressing the keypad.
Press the [
●
To delete the code entered, press the [
the [ ] key to delete all digits.
3
Press and hold the PTT switch to make the call.
The " " icon blinks. "Individual" and the ID name of the target transceiver are
●
displayed.
Speak into the transceiver as you would during a normal call.
●
10
] key to enter the manual input mode.
UID
] key to delete one digit, or press and hold