Kenwood NX-5200K3 User Manual page 32

Regroup Request <Regrp>
o
Allows you to send a request to the dispatcher to join the talkgroup set up by the
dispatcher. The channel name for the dynamic regroup channel appears on the
display when the transceiver joins the talkgroup.
Rekey Request <Rekey>
o
Allows you to make a request to update the Encryption key.
Remote Control <Remote>
o
Allows you to remotely control a specified transceiver from this transceiver.
In the NXDN and DMR systems, it allows you to operate the transceiver directly, send
a remote control message and control the target transceiver.
RX Audio Equalizer (High)
o
Allows you to set the audio response for high frequencies.
RX Audio Equalizer (High Midrange)
o
Allows you to set the audio response for high midrange frequencies.
RX Audio Equalizer (Midrange)
o
Allows you to set the audio response for midrange frequencies.
RX Audio Equalizer (Low Midrange)
o
Allows you to set the audio response for low midrange frequencies.
RX Audio Equalizer (Low)
o
Allows you to set the audio response for low frequencies.
RX Auto Gain Control
o
Allows you to set the transceiver to automatically adjust the volume of the receiving
sound to a specific level for easy listening.
Save GPS Data <GPS_S>
o
Allows you to save the current date, time and location information on the microSD
card.
Save Log Data <Log>
o
Allows you to save the operation and communication logs of this transceiver.
Scan <Scan>
o
Refer to "SCAN" {p. 37} .
Scan Delete/ Add <D/A>
o
Allows you to include or omit each channel in the scan sequence.
Scan Normal <ScnNrm>
o
Allows you to forcibly perform a non-priority scan even when priority scan has been
set.
32