Kenwood NX-5200K3 User Manual page 70

NOTIFICATION DISPLAY
Display
(Display for 1 second)
(Display for 1 second)
(Display for 1 second)
(Display for 1 second)
70
The integrated circuit (IC) which enables the Bluetooth
function is not working properly.
No device is found in the Bluetooth Find Device Mode.
There is no response from the Bluetooth device on the request
for pairing, Headset Profile (HSP) connection, Serial Port
Profile (SPP) connection or Bluetooth Low Energy (Heart Rate
Service, Automatic Injury Detection Service) connection.
The Bluetooth device has rejected a request for pairing,
Headset Profile (HSP) connection or Bluetooth Low Energy
(Heart Rate Service, Automatic Injury Detection Service)
connection.
The Bluetooth device does not support Headset Profile (HSP)
connection.
Cause