❷ Connecting Your Computer/Connecting The Power Cord - NEC PX602UL-BK User Manual

❷ Connecting Your Computer/Connecting the Power Cord
1. Connect your computer to the projector.
This section will show you a basic connection to a computer. For information about other connections, see "(2)
Making Connections" on page 125.
Connect the display output terminal (mini D-sub 15 pin) on the computer to the COMPUTER 1 IN terminal on the
projector with a commercially-available computer cable (with ferrite core) and then turn the knobs of the terminals
to secure them.
2. Connect the supplied power cord to the projector.
First connect the supplied power cord's three-pin plug to the AC IN terminal of the projector, and then connect the
other plug of the supplied power cord in the wall outlet.
Important Information:
• When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to
the off [O] position. Failure to do so may cause damage to the projector.
CAUTION:
Parts of the projector may become temporarily heated if the projector is turned off with the POWER button or if the
AC power supply is disconnected during normal projector operation.
Use caution when picking up the projector.
Computer cable (with ferrite core)
(sold commercially)
13
2. Projecting an Image (Basic Operation)
COMPUTER 1 IN
Make sure that the prongs are fully inserted into
both the AC IN terminal and the wall outlet.
To wall outlet