Check The Product Overview, Supplied Items And Part Names; Introduction To The Projector - NEC PV800UL-W User Manual

1. Check the product overview, supplied items and part names

1-1. Introduction to the Projector

This section introduces you to your new projector and describes the features and controls.
• Liquid crystal type high brightness/high resolution projector
This projector has a display resolution of 1920 dots × 1200 lines (WUXGA) and an aspect ratio
of 16:10.
Model
PV800UL-W/PV800UL-B
PV710UL-W/PV710UL-B
• A long-life laser diode is equipped in the light module
The product can be operated at low cost because the laser light source can be used for a long
time without requiring replacement or maintenance.
• Wide range of optional lenses selectable according to the place of installation
This projector supports 10 types of optional lenses, providing a selection of lenses adapted to
a variety of places of installation and projection methods.
Note that no lens is mounted upon shipment from the factory. Please purchase optional lenses
separately.
• Motorized lens control function for easily adjusting the position of the projected image
The position of the projected image (lens shift) can be adjusted by buttons either on the control
panel on the back of the cabinet or the remote control.
• 360 dgeree free projection
This projector can be installed universally in every angle.
For controlling fine inclination, use the tilt foot. Install an appropriate metal and a stand that
has enough strength to support the projector for controlling the installation angle.
• Seamless switch function for smoother screen changes when switching the signal
When the input connector is switched, the image displayed before switching is held so that that
the new image can be switched to without a break due to absence of a signal.
• Supports wired LAN
Equips the LAN and Ethernet/HDBaseT (RJ-45) ports. Utilizing a wired LAN connected with these
ports, it enables to control the projector by a computer.
Brightness
8000 lm
7100 lm
1