Connecting The Pc To The Line Voltage - Fujitsu SCENIC8651 Manual

Preparation for use and operation

Connecting the PC to the line voltage

1 = Notch for inserting the screwdriver


Check the rated voltage.
The value marked with an arrow must agree with the local line voltage:
!
115 = 100 V to 125 V
If the rated voltage does not agree with the local line voltage, lift out the plug-in unit with a
screwdriver (1), turn it and replace it.


Plug the system unit's power cable into the system unit (1) and then into the grounded power
outlet (2).
14
Connecting the PC to the line voltage
100 V - 125 V
1
230 = 200 V to 240 V
1
200 V - 240 V
1
2
A26361-K516-Z100-3-7619