Installing and removing drives
Changing the floppy disk drive
Open the system unit (see
Pull the data and the power supply connectors from the floppy disk drive (1).
Remove the screw (2).
Take the drive out of the system unit (3).
Take the new floppy disk drive out of its packaging.
Slide the drive into the system unit (1).
Plug the data and the power supply connectors into the floppy disk drive (2).
Fasten the drive with the screw (3).
Close the system unit (see
If necessary, you must adapt the entry for the drive in the Setup menu.
i
A26361-K516-Z100-3-7619
"Opening the system
1
2
"Assembling the system
unit").
2
3
unit").
System expansions
3
1
37