Table of Contents
Advertisement
Installing and removing drives
Take the new drive out of its packaging.
Make the required settings on the drive (if necessary, on installed drives as well).
Slide the drive into the system unit (1).
Plug the connectors of the data cable and the power supply cable into the drive (2).
Fasten the drive with the screws (3).
Close the system unit (see
If necessary, you must adapt the entry for the drive in the Setup menu.
i
A26361-K516-Z100-3-7619
2
"Assembling the system
3
unit").
System expansions
1
35
Advertisement
Table of Contents
