Table of Contents
Advertisement
Preparation for use and operation
6 - Power-on indicator
−
green:
The System unit is on.
−
orange:
The System unit is ready-to-operate.
In this mode the PC consumes very little power and can be switched on at the ON/OFF
switch. If the remote-on function is Enabled in the BIOS Setup, the system unit can be
switched on by an incoming message (e. g. fax, telephone call).
−
flashes green/orange:
The indicator only flashes on systems which support the ACPI function (Advanced
Configuration and Power Interface).
The system unit is in the energy-saving mode (standby). After being switched on with the
ON/OFF switch, the PC returns to the state it was in before the energy-saving mode. In
the energy-saving mode the system unit may not be switched off with the main switch or
disconnected from the mains supply, as this may otherwise result in data loss.
−
does not glow:
The system unit is switched off.
Keyboard
1 = function keys
2 = ON/OFF switch (optional)
3 = alphanumeric keypad
20
1
3
4 = cursor control keys
5 = numeric keypad (calculator keypad)
Keyboard
2
4
5
A26361-K516-Z100-3-7619
Advertisement
Table of Contents
