Printing Preferences - Save/Restore Tab; Save/Restore - Restore Settings From File; Save/Restore - Save Settings To File; Save/Restore - Restore Factory Defaults - Microcom 485TM Operator's Manual

Direct thermal printer

Getting Started

3.16.14 Printing Preferences - Save/Restore tab

The Save/Restore tab is used to export or import driver settings and to force back to the

factory defaults based on the printer model installed.

3.16.14.1

This is used to import or restore driver settings from a .MDS file. The driver settings are

contained within a .MDS file and may be restored or configured if imported using the

Restore feature.

3.16.14.2

This is used to export or save the current settings in a .MDS file. This file contains the driver

setup used to configure the driver.

3.16.14.3

This will force the driver defaults of the printer model installed.

This section describes the Windows compatible Status messages that are displayed in

spooler and the Status Monitor feature found on the Modification tab. These messages may

3-36

485TM Operator's Manual - 880063-0100

Chapter 3

Table of Contents

Do you have a question about the 485TM and is the answer not in the manual?