Configuring The Driver - Microcom 485TM Operator's Manual

Chapter 3 Getting Started
3.16.2

Configuring the Driver

This section will explain how to configure the Windows Driver for proper operation. The
example below also shows a Microcom Thermal Printer under Unspecified devices. This is
the USB driver that is loaded when the printer is powered on and the printer USB port is
connected to the printer.
Under Devices and Printers, you should see the printer model that was installed. Right click
on the icon and select Printer properties to setup and to change the driver settings.
485TM Operator's Manual - 880063-0100 3-23