Albatron PX915P Series User Manual page 49

How to install Windows® 98/ ME to the SATA device?
1. Make sure that the "On-Chip Serial ATA" option is set to " Combined Mode" in the BIOS
Setup Utility. (For more details, please see page 33 "OnChip Serial ATA Setting".)
BIOS Setup Utility -> Integrated
ATA "Combined Mode"
2. Save all BIOS configurations and exit the BIOS setup utility.
3. Place the Windows® 98/ME CD into the CD-ROM drive to begin the OS installation
process. During the installation you will see that the SATA device has been assigned
to the C: drive. Continue and complete the installation of the Windows® OS.
4. Because the SATA device only support windows® 2000/ XP, therefore, If you want to
install windows® 98/ ME, you must had the SATA devices simulate PATA device (by
using IDE channel). So that you should set the "On-Chip Serial ATA" options to
"Combined Mode" all time in the BIOS Setup Utility.
How to Install the ITE RAID Driver during Windows
installation with the IDE RAID Device?
1. Copy the "ITE RAID Driver" from the bundle CD Driver to a floppy disk. 【CD File
Location Path => D: \ Driver \ ITE_RAID\ RAID \ WIN2K or WINXP (depends on the OS
you've installed)\ includes 4 files (iteraid.cat/ iteraid.sys/ iteraid.inf/ txtsetup.oem)】
2. Power off the system. Connect the IDE hard disk to one of the RAIDIDE connectors.
Power up the system.
3. Place your Windows
Setup" screen displays, press "F6".
4. Press 's' when setup asks if you want to specify an additional device. Insert the floppy
disk which includes the "ITE RAID Driver" into the floppy drive.
Press 'Enter' and select the appropriate OS device driver.
5. Press 'Enter' again to continue the setup process.
6. Follow the setup instructions and select your choice for partition and file system.
7. After setup examines your disks, it will copy files to the Windows
folders and restart the system. After the system is rebooted the setup program will
continue with the installation all the way to completion.
8. Wait until Windows ®
settings, components, and the final set of tasks. Reboot the system if you are asked
to do so.
Peripherals
® 2000/XP CD into the CD-ROM/DVD drive. When the "Windows
2000/ XP finishes installing devices, regional settings, networking
45
PX915P/ PX915G Series
OnChip IDE Device On-Chip Serial
® 2000/XP
2000/ XP installation
®