FAN Headers
Three power headers are available for the cooling fans. Cooling fans play an important
role in maintaining the ambient temperature in your system.
Attention: We strongly recommend that you use a CPU
fan sink with your CPU. You can attach the power cable
from the CPU fan sink to the CPUFAN Header.
Memory Installation
These mainboards contain 4 memory slots which use 184-pin DDR SDRAM with a total
memory capacity of up to 4 GB. You must install unbuffered/non-ECC DDR-SDRAM DIMMs
with either 256 MB, 512 MB, or 1 GB of memory. These modules must be either DDR400
(PC3200) or DDR333 (PC2700) SDRAM.
Attention: We strongly recommend that You have to install
modules in same specification to achieve the best effects. (Same
timing specifications and same DDR speed) lest the failure of
power-on or low memory speed if you install modules in
different type, different SPD (series presence detect).
PX915P/ PX915G Series
10