Albatron PX915P Series User Manual page 31

PX915P/ PX915G Series
Typematic Rate Setting
When "Enabled", the "typematic rate" and "typematic delay" can be configured.
Typematic Rate determines the keystroke repeat rate used by the keyboard controller..
Options: Disabled (default)、Enabled
Typematic Rate (Chars/Sec)
The rate at which a character repeats when you hold down a key.
Options: 6 (default)、8、10、12、15、20、24、30
Typematic Delay (Msec)
The delay before keystrokes begin to repeat. Options: 250 (default)、500、750、1000
APIC Mode
By enabling this option, "MPS version control for OS" can be configured.
Options: Disabled、Enabled (default)
MPS Version Control For OS
The 1.1 version is the older version that supports 8 more IRQs in the Windows NT
environment. Choose the new 1.4 version for Windows 2000 and Windows XP.
Options: 1.4 (default)、1.1
OS Select For DRAM > 64MB
Select "OS2" only if you are running the OS/2 operating system with greater than 64MB of
RAM. Options: Non-OS2 (default)、OS2
HDD S.M.A.R.T. Capability
Self Monitoring Analysis and Reporting Technology is a technology that enables a PC to
attempt to predict the possible failure of storage drives.
Options: Disabled (default)、Enabled
Intel OSB Logo Show
This item allows you to show or hide the small LOGO EPA.
Options: Disabled、Enabled (default)
Advanced Chipset Features
DRAM Timing Selectable
This item determines DRAM clock/ timing using SPD or manual configuration.
Make sure your memory module has SPD (Serial Presence Data), if you want to select the
"By SPD" option. Options: Manual、By SPD (default)
27