Albatron PX915P Series User Manual page 42

3. User Defined (default)
Allows you to set each mode individually.
When this option is enabled, each of the ranges are from 1 minute to 1 hour except for
HDD Power Down, which ranges from 1 minute to 15 minute and includes a "disable"
option.
Note: If you select Min. or Max. Power Saving modes, the "HDD Power Down" value and
the "Suspend Mode" value are both fixed.
Video Off Method
This option determines the manner in which the monitor goes blank.
Options:
V/H SYNC+Blank
Blank Screen(default)
DPMS Support
Video Off In Suspend
This determines whether power to the monitor is switched off when the computer is in
suspend mode. Options: Yes、No (default)
Suspend Type
This item allows you to select the suspend type under the ACPI operating system.
Options: Stop Grant (default)、PwrOn Suspend
Modem Use IRQ
This determines the modem's IRQ. Options: 3 (default)、4、5、7、9、10、11、NA.
Suspend Mode
This item allows you to select the suspend time under the ACPI operating system.
Options: Disabled(default)、1Min、2Min、4Min、8Min、12Min、20Min、30Min、40Min、1Hour
HDD Power Down
When enabled, the hard disk drive will power down after a certain configurable period
of system inactivity. All other devices remain active.
Options: Disabled (default)、1 Min、2 Min、3 Min、4 Min、5 Min、6 Min、7 Min、8 Min、9 Min、
10 Min、11 Min、12 Min、13 Min、14 Min、15Min
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video
buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
38
PX915P/ PX915G Series