Honda HS1336iAS Owner's Manual page 63

N (neutral)
DRIVE CLUTCH
LEVER
MAIN SHIFT LEVER
AUGER CLUTCH SWITCH
The auger and blower will start to turn
when the drive clutch lever and auger
clutch switch is operated. Check around the
snow blower for safety before operating the
lever and switch.
4) Check that the main shift lever is in the N
(neutral) position and squeeze the drive
clutch lever.
5) Push the auger clutch switch to operate
on the auger and blower.
• The indicator (green) comes on when
you push the auger clutch switch.
• When the auger clutch switch is
pushed for four seconds or longer, the
protection function activates. This
stops the auger and blower from
turning.
• The auger and blower keep turning
while the drive clutch lever is
squeezed. Push the auger clutch
switch again to stop the auger and
blower. (Interlocking operation of the
drive clutch lever and auger clutch
switch)
OPERATION
61